Contact Us

Technical Support of DMNC CNC EDM Machine​

Notes for maintenance of EDM small hole drilling machine

Notes for maintenance of EDM small hole drilling machine

2020,23,09

The dos and don'ts for maintenance of EDM small hole drilling machine. In order to extend the working life of the EDM pinhole machine and improve its work efficiency, we need to maintain and ma...

More >>
Processing technology of punch and die with CNC Wire Cutting EDM

Processing technology of punch and die with CNC Wire Cutting EDM

2020,21,09

1. Analysis of Wire EDM Machining1) The male die has the R angle that is too small (less than 2 mm), and the CNC milling process can't process to the position, as shown in Figure 1.1) The male die punch i...

More >>
How to cut aluminum to machine EDM aluminum parts by wire cutting

How to cut aluminum to machine EDM aluminum parts by wire cutting

2020,21,09

Wire EDM cutting aluminum has always been a big problem. The conductive block wears quickly, the molybdenum wire is easily broken, and the working time of the working fluid is short. These are very co...

More >>
Research and Application of Fluid Channel Die Sinking EDM Technology

Research and Application of Fluid Channel Die Sinking EDM Technology

2020,21,09

Aimed at the processing problems of the fluid channel (also known as the internal curved hole) in the large flange end cover, the key component in the aviation equipment field such as centrifugal comp...

More >>
Stand Out in the
EDM Machining Industry
GET STARTED
DMNC-EDM
learn more
B3, Dimon Building, Garden Road, Haidian District, Beijing, China dmncedm@gmail.com +86-13914052243